To connect on Android, please follow the steps below:
To configure this VPN, you must first enable a screen lock on your device (such as a PIN, pattern, or password).
Note: Due to differences between Android versions, the images may look slightly different on your device. However, the settings are generally the same on all Android phones and tablets.
Step 1: Go to your phone’s Settings and select More.
(On some Android devices, this option may appear as Wireless & Networks or Connections.)
Step 2: Select VPN.
Step 3: Select the (+)option.
(On some Android devices, this may appear as Add VPN network, or it may be located under the three-dot menu in the top-right corner.)
Step 4: Configure the settings according to the numbered sections shown in the image below:
1: Enter vpn-iran.com.
2: From the Typesection, select PPTP or L2TP/IPSec PSK. Both options work properly and there is no issue using either one.
Note: If you select PPTP, you can skip item 4.
3: Based on your account type (financial or non-financial), enter one of the following server addresses:
Non-financial account:
Server Address 1: 78.157.57.92
Server Address 2: 78.157.57.93
Financial account server address:
78.157.57.77
Note:Server addresses must be entered without any prefix or suffix. If you see `http://` at the beginning or `/` (slash) at the end, remove them and enter only the server IP address.
4: Enter 12346578.
5:Make sure the L2TP secret and IPSec identifier fields are left empty , then select Save.
Step 5:
Select the VPN connection you created, then:
- In the Username field, enter the username you received from the store.
- In the Password field, enter the password provided by the store.
Tip: After entering your username and password, enable Save account information so your details are saved and you won’t need to re-enter them each time.
3: Select Connect.
Important: Please make sure to enter all required information including server addresses, pre-shared key, username, and password using English letters and numbers only. You can now start using your service.
Fixing “Connection Failed” or “Unsuccessful” Errors on Android
This error usually occurs due to incorrect settings. Please make sure that the entered information such as username, password, and pre-shared key is correct.
Also, try connecting using both server addresses and verify that the server IPs are entered correctly.
We recommend reviewing the setup guide from the beginning and carefully following all steps again.
